Free Tutorial: 3D Beaded Polymer Clay Doll ~ Inexpensive Version

February 2nd, 2009 in 3D Beaded Figurines | 4 Comments

Advertisement

diy-beaded-doll-head-red-hat-little-girl-simple-version.jpg

Beading Supplies:
A – 3mm Swarovski Bicone #5301 Light Rose x 6 pcs
B – 5mm Swarovski Bicone #5301 Crystal AB x 2 pcs
C – 4mm Swarovski Bicone #5301 Crystal AB x 4 pcs
D – 5mm Swarovski Bicone #5301 Light Rose x 4 pcs
E – 6mm Swarovski Bicone #5301 Rose x 4 pcs
F – 3mm Swarovski #5301 Crystal x 1 pcs

Other Supplies:
G – 40mm Eyepin (will be given for FREE if you purchase our polymer clay doll head)
H – 0.3mm Non-elastic Thread
I – Polymer Clay Doll Head

Note: For tutorial illustration purpose, we use thicker 0.4mm Thread.

diy-beaded-doll-head-step-1a.jpg

FIRST LAYER Step 1a: From START point, thread the beads as shown on your left and right hand thread.

diy-beaded-doll-head-step-1b.jpg

FIRST LAYER Step 1b: Tie a simple knot twice and cut the excess thread. First layer is completed.

diy-beaded-doll-head-simple-version-step-3.jpg

SECOND LAYER Step 1 : Start your beadwork as shown in the pictures above.

diy-beaded-doll-head-simple-version-step-4.jpg

SECOND LAYER Step 2 : For blue thread, string 1 D & 1 E, then cross both thread with 1 D. Pass blue thread through an existing bead as shown.

diy-beaded-doll-head-simple-version-step-5.jpg

SECOND LAYER Step 3 : For red thread, string 1 E, cross both thread with 1 D. Pass red thread through an existing bead as shown.

diy-beaded-doll-head-simple-version-step-6.jpg

SECOND LAYER Step 4: For blue thread, string 1 E, cross both thread with 1 D. Pass blue thread through 2 existing beads marked as “*”.

SECOND LAYER Step 5: Cross both thread with 1 E.

diy-beaded-doll-head-simple-version-step-7.jpg

This is how it looks like after finishing step 5, view from top.

diy-beaded-doll-head-simple-version-step-8.jpg

SECOND LAYER Step 6: This is bottom view. Bring right hand thread through 3 beads as shown in the picture above. Now both threads meet with each other and you can tie a simple knot twice. Cut the excess threads. At this step you have completed second layer.

diy-beaded-doll-head-simple-version-step-9.jpg

Step 7: Thread 1 F onto a 40mm Eyepin (eyepin will be given for FREE if you purchase our polymer clay doll head), follow by second layer and first layer. Finally, insert the doll head on top of first layer and make a simple loop similar to the earlier version tutorial -> Free Tutorial: 3D Beaded Polymer Clay Doll ~ Most Popular Version

diy-beaded-doll-head-red-hat-little-girl-simple-version.jpg

This is an inexpensive version of beaded doll head. Hope you like it! :)

You can subscribe to BEADS TALK by entering your email below, and you will never miss any posts anymore. The blog will email you whenever there is a new post.

Email:

You may also like to read the following posts...

4 Responses to “Free Tutorial: 3D Beaded Polymer Clay Doll ~ Inexpensive Version”

  1. saya mau tanya, benang yang di pakai buat penyambung manik2 nya terbuat dari apa ya??? mohon dibalas ke e-mail saya,
    yoryantho@gmail.com

  2. Pakai Size 0.25mm Tali Tangsi….

  3. I like this cute doll.

    Greetings from Germany
    Dagmar

  4. mau tanya, tuh kepaa polymernya terbuat dari clay yah? kok bisa mengkilat? bagaimana caranya?

Leave a Reply